Enumeration index -1 is out of range, ignore it
Enumeration index -1 is out of range, ignore it
Enumeration index -1 is out of range, ignore it
Upgrading Structure Role property to IfcRole
Upgrading Upper floor main beam Role property to IfcRole
Upgrading Upper floor front beam 02 Role property to IfcRole
Upgrading Upper floor front beam 01 Role property to IfcRole
Upgrading Upper floor slab Role property to IfcRole
Upgrading Roof main beam Role property to IfcRole
Upgrading Roof front beam 02 Role property to IfcRole
Upgrading Roof front beam 01 Role property to IfcRole
Upgrading Structure009 Role property to IfcRole
Upgrading Ground floor main beam Role property to IfcRole
Upgrading Footing Role property to IfcRole
Upgrading Roof slab Role property to IfcRole
Upgrading Ground floor slab 02 Role property to IfcRole
Upgrading Ground floor slab 01 Role property to IfcRole
Upgrading Curb slab Role property to IfcRole
Upgrading Curb border Role property to IfcRole
Upgrading Balcony horizontal support 02 Role property to IfcRole
Upgrading Balcony horizontal support 01 Role property to IfcRole
Upgrading Balcony beam 01 Role property to IfcRole
Upgrading Balcony beam 02 Role property to IfcRole
Upgrading Balcony slab Role property to IfcRole
Upgrading Roof wall Role property to IfcRole
Upgrading Upper floor column Role property to IfcRole
Upgrading Ground floor column Role property to IfcRole

Точка параметры : [:Увеличить радиус привязки, Z:Ограничить по Z, Q:Добавить дополнительную точку привязки, ]:Уменьшить радиус привязки, Y:Ограничить по Y, X:Ограничить по X, S:Привязка вкл/выкл

<type 'exceptions.AttributeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1182, in move
    self.pt = FreeCADGui.Snapper.snap(mousepos,lastpoint=last,active=ctrl,constrain=shift)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 303, in snap
    snaps.extend(self.snapToSpecials(obj,lastpoint,eline))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 921, in snapToSpecials
    if obj.ViewObject.ShowNodes:
AttributeError: 'Gui.ViewProviderDocumentObject' object has no attribute 'ShowNodes'
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup
typecheck[tup]: None is not <type 'Base.Vector'>
<type 'exceptions.TypeError'>
Traceback (most recent call last):
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftSnap.py", line 1186, in move
    movecallback(self.pt,self.snapInfo)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Arch\ArchPanel.py", line 287, in update
    self.tracker.pos(point)
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftTrackers.py", line 938, in pos
    self.trans.translation.setValue(DraftVecUtils.tup(p))
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 75, in tup
    typecheck ([(u,Vector)], "tup");
  File "C:\Users\KAZAN\Downloads\FreeCAD_0.18.15806_x64_dev_win\Mod\Draft\DraftVecUtils.py", line 56, in typecheck
    raise TypeError("fcvec." + str(name))
TypeError: fcvec.tup