Msg: FreeCAD 0.18, Libs: 0.18R0.18.2
© Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2019
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

Log: Time = Mon May 20 18:48:58 2019
Log: AppDataSkipVendor = true
Log: AppHomePath = /usr/local/FreeCAD/
Log: AppIcon = freecad
Log: AppTempPath = /tmp/
Log: BinPath = /usr/local/FreeCAD/bin/
Log: BuildRepositoryURL = Unknown
Log: BuildRevision = 0.18.2
Log: BuildRevisionDate = Unknown
Log: BuildVersionMajor = 0
Log: BuildVersionMinor = 18
Log: Console = 0
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2019
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##


Log: Debug = 0
Log: DocPath = /usr/local/FreeCAD/doc/
Log: ExeName = FreeCAD
Log: ExeVendor = FreeCAD
Log: ExeVersion = 0.18
Log: LoggingFile = 1
Log: LoggingFileName = /home/cmt/.FreeCAD/FreeCAD.log
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page
Log: PATH = /usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/usr/games:/home/cmt/bin
Log: PYTHONPATH = 
Log: PythonSearchPath = /usr/local/bin/../lib/python36.zip:/usr/local/bin/../lib/python3.6:/usr/local/bin/../lib/python3.6:/usr/local/bin/../lib/python3.6/lib-dynload
Log: RunMode = Gui
Log: SplashAlignment = Bottom|Left
Log: SplashInfoColor = #c8c8c8
Log: SplashScreen = freecadsplash
Log: SplashTextColor = #ffffff
Log: StartWorkbench = StartWorkbench
Log: SystemParameter = /home/cmt/.FreeCAD/system.cfg
Log: UserAppData = /home/cmt/.FreeCAD/
Log: UserHomePath = /home/cmt
Log: UserParameter = /home/cmt/.FreeCAD/user.cfg
Log: Verbose = 
Log: Create Application
Log: Run App init script
Log: Init: starting App::FreeCADInit.py
Log: Init:   Searching for modules...
Log: Init:      Initializing /usr/local/FreeCAD/Mod/AddonManager... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Arch... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Complete... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Draft... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Drawing... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Fem... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Idf... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Image... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Import... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Inspection... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Material... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Measure... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Mesh... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/MeshPart... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/OpenSCAD... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Part... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/PartDesign... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Path... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Plot(Init.py not found)... ignore
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Points... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Raytracing... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/ReverseEngineering... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Robot... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Ship(Init.py not found)... ignore
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Show(Init.py not found)... ignore
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Sketcher... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Spreadsheet... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Start... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Surface... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/TechDraw... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Test... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Tux(Init.py not found)... ignore
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Web... done
Log: Using /usr/local/FreeCAD/Mod as module path!
Log: System path after init:
Log:    /usr/local/FreeCAD/bin
Log:    /usr/local/FreeCAD/Mod/AddonManager
Log:    /usr/local/FreeCAD/Mod/Arch
Log:    /usr/local/FreeCAD/Mod/Complete
Log:    /usr/local/FreeCAD/Mod/Draft
Log:    /usr/local/FreeCAD/Mod/Drawing
Log:    /usr/local/FreeCAD/Mod/Fem
Log:    /usr/local/FreeCAD/Mod/Idf
Log:    /usr/local/FreeCAD/Mod/Image
Log:    /usr/local/FreeCAD/Mod/Import
Log:    /usr/local/FreeCAD/Mod/Inspection
Log:    /usr/local/FreeCAD/Mod/Material
Log:    /usr/local/FreeCAD/Mod/Measure
Log:    /usr/local/FreeCAD/Mod/Mesh
Log:    /usr/local/FreeCAD/Mod/MeshPart
Log:    /usr/local/FreeCAD/Mod/OpenSCAD
Log:    /usr/local/FreeCAD/Mod/Part
Log:    /usr/local/FreeCAD/Mod/PartDesign
Log:    /usr/local/FreeCAD/Mod/Path
Log:    /usr/local/FreeCAD/Mod/Plot
Log:    /usr/local/FreeCAD/Mod/Points
Log:    /usr/local/FreeCAD/Mod/Raytracing
Log:    /usr/local/FreeCAD/Mod/ReverseEngineering
Log:    /usr/local/FreeCAD/Mod/Robot
Log:    /usr/local/FreeCAD/Mod/Ship
Log:    /usr/local/FreeCAD/Mod/Show
Log:    /usr/local/FreeCAD/Mod/Sketcher
Log:    /usr/local/FreeCAD/Mod/Spreadsheet
Log:    /usr/local/FreeCAD/Mod/Start
Log:    /usr/local/FreeCAD/Mod/Surface
Log:    /usr/local/FreeCAD/Mod/TechDraw
Log:    /usr/local/FreeCAD/Mod/Test
Log:    /usr/local/FreeCAD/Mod/Tux
Log:    /usr/local/FreeCAD/Mod/Web
Log:    /usr/local/bin
Log:    /usr/local/sbin
Log:    /usr/bin
Log:    /usr/sbin
Log:    /bin
Log:    /sbin
Log:    /usr/games
Log:    /home/cmt/bin
Log: Init: App::FreeCADInit.py done
Log: Init: Creating Gui::Application and QApplication
Log: Local server 'FreeCAD' started
Log: OpenGL version is: 4.5 (4.5.0 NVIDIA 390.87)
Log: Run Gui init script
Log: Init: Running FreeCADGuiInit.py start script...
Log: Init:   Searching modules...
Log: Init:      Initializing /usr/local/FreeCAD/Mod/AddonManager... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Arch... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Complete... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Draft... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Drawing... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Fem... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Idf(InitGui.py not found)... ignore
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Image... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Import... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Inspection... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Material... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Measure(InitGui.py not found)... ignore
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Mesh... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/MeshPart... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/OpenSCAD... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Part... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/PartDesign... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Path... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Plot... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Points... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Raytracing... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/ReverseEngineering... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Robot... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Ship... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Show(InitGui.py not found)... ignore
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Sketcher... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Spreadsheet... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Start... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Surface... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/TechDraw... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Test... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Tux... done
Log: Init:      Initializing /usr/local/FreeCAD/Mod/Web... done
Log: Init: Loading FreeCAD GUI
Log: Init: Running FreeCADGuiInit.py start script... done
Log: Init: Activating default workbench StartWorkbench
Log: Loading GUI of Web module... done
Log: Loading GUI of Start module... done
Log: Loading Start module... done
Log: libpng warning: iCCP: known incorrect sRGB profile
Log: libpng warning: iCCP: known incorrect sRGB profile
Log: Init: Showing main window
Log: Main window restored
Log: Show main window
Log: Toolbars restored
Log: Init: Entering event loop
Log: Init: Processing command line files
Log: Module: Part
Log: Loading Part module... done
Log: Loading Sketcher module... done
Log: Loading PartDesign module... done
Log: Loading GUI of Part module... done
Log: Loading GUI of Sketcher module... done
Log: Loading GUI of PartDesign module... done
Log: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1401, resource id: 10545895, major code: 40 (TranslateCoords), minor code: 0
Log: Loading Path module... done
Log: Loading PathStock... done
Log: Loading GUI of Path module... done
Log: Qt WebEngine seems to be initialized from a plugin. Please set Qt::AA_ShareOpenGLContexts using QCoreApplication::setAttribute before constructing QGuiApplication.
Log: Loading PathToolController... done
Log: Loading PathJobGui... done
Log: Loading Inspection module... done
Log: Loading TechDraw module... done
Log: Loading PathOpGui... done
Log: Loading PathComment... done
Log: Loading PathDeburrGui... done
Log: Loading PathDressup... done
Log: Loading DressupDogbone... done
Log: Loading Path_DressupDragKnife... done
Log: PathDressupRampEntry.NOTICE: Loading Path_DressupRampEntry... done

Log: PathDressupHoldingTags.NOTICE: Loading Path_DressupTag... done

Log: PathDressupTagGui.NOTICE: Loading PathDressupTagGui... done

Log: PathDressupLeadInOut.NOTICE: Loading PathDressupLeadInOut... done

Log: Loading PathDrillingGui... done
Log: Loading PathEngraveGui... done
Log: Loading PathFixture... done
Log: Loading PathHelixGui... done
Log: Loading PathHop... done
Log: Loading PathMillFaceGui... done
Log: Loading PathPocketGui... done
Log: Loading PathPocketShapeGui... done
Log: Loading PathPost... done
Log: Loading PathProfileContourGui... done
Log: Loading PathProfileEdgesGui... done
Log: Loading PathProfileFacesGui... done
Log: Loading Mesh module... done
Log: Loading PathSimulator module.... done
Log: Loading PathSimulator Gui... done
Log: Loading PathStop... done
Log: Loading MeshPart module... done
Log: Loading PathSurfaceGui... done
Log: Loading Path workbench... done
Msg: Path workbench activated
Err: Running the Python command 'Path_Job' failed:
Traceback (most recent call last):
  File "/usr/local/FreeCAD/Mod/Path/PathScripts/PathJobCmd.py", line 64, in Activated
    dialog = PathJobDlg.JobCreate()
  File "/usr/local/FreeCAD/Mod/Path/PathScripts/PathJobDlg.py", line 55, in __init__
    self.dialog.templateGroup.hide()

'PySide2.QtWidgets.QDialog' object has no attribute 'templateGroup'Log: Hide main window
Log: Finish: Event loop left
Log: Destruct Gui::Application
Log: FreeCAD terminating...
Log: Saving system parameter...
Log: Saving system parameter...done
Log: Saving user parameter...
Log: Saving user parameter...done