View Issue Details

IDProjectCategoryView StatusLast Update
0002855PathBugpublic2017-01-18 20:57
Reportermlampert Assigned Tosliptonic  
PrioritynormalSeverityminorReproducibilityalways
Status closedResolutionfixed 
PlatformallOSallOS Versionall
Product Version0.17 
Target Version0.17Fixed in Version0.17 
Summary0002855: Contour operation always goes to z=0
DescriptionCreating a contour operation for a part that does not have its lowest point at z=0 results in the wrong Path generation. Contour will always mill to z=0, regardless of where the Part is actually positioned.
TagsNo tags attached.
FreeCAD Information

Activities

sliptonic

2017-01-18 20:57

manager   ~0007865

fixed with commit 636804f0f9d35be1d6a2a871569c00393dc8ad2a

Issue History

Date Modified Username Field Change
2017-01-14 01:19 mlampert New Issue
2017-01-18 20:57 sliptonic Note Added: 0007865
2017-01-18 20:57 sliptonic Status new => closed
2017-01-18 20:57 sliptonic Assigned To => sliptonic
2017-01-18 20:57 sliptonic Resolution open => fixed
2017-01-18 20:57 sliptonic Fixed in Version => 0.17