View Issue Details

IDProjectCategoryView StatusLast Update
0003662PartDesignBugpublic2018-11-04 22:41
Reporterppemawm Assigned ToDeepSOIC  
PriorityimmediateSeveritymajorReproducibilityalways
Status closedResolutionfixed 
Product Version0.18 
Fixed in Version0.18 
Summary0003662: Not able to attach a sketch to a face or edge with any mode
DescriptionBug was verified by DeepSOIC https://forum.freecadweb.org/viewtopic.php?f=3&t=31931

This problem of Attachment Map Mode does not occur in release version 0.17 or at least up to V0.18.14838.


Steps To Reproduce1. Create Body
2. Pad a circle to create a cylinder (or use additive primitive)
3. Create a new sketch, select any base plane, close sketch
4. Open Attachment Map Mode in Property Panel and select any edge or face in 3D view
5. Select any Mode then OK--> Datum Dialog--Error displayed and attachment fails
Additional InformationOS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15072 (Git)
Build type: Release
Branch: master
Hash: e517c00d9b3da3d1dbe5d5b0159ac5fa95790a8f
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: English/UnitedStates (en_US)

TagsNo tags attached.
FreeCAD Information

Activities

Issue History

Date Modified Username Field Change
2018-10-30 19:16 ppemawm New Issue
2018-10-30 19:16 ppemawm File Added: attachment_error_0.18.FCStd
2018-10-30 19:16 ppemawm File Added: attachment_map_mode_error_0.18.JPG
2018-11-04 22:41 wmayer Assigned To => DeepSOIC
2018-11-04 22:41 wmayer Status new => closed
2018-11-04 22:41 wmayer Resolution open => fixed
2018-11-04 22:41 wmayer Fixed in Version => 0.18
2018-11-04 22:41 wmayer Note Added: 0012134