|
|
| Reporter | gpothier | Assigned To | | |
|---|
| Priority | normal | Severity | major | Reproducibility | always |
|---|
| Status | new | Resolution | open | |
|---|
| Product Version | 0.18 | |
|---|
| Target Version | 0.20 | |
|---|
|
|
| Summary | 0003676: Pocket operations in Spiral pattern sometimes leave island on face |
|---|
| Description | Under some conditions, pocket operations leave islands in the middle of the face (see attached screenshots). Using the zig-zag pattern instead of spiral works around the problem.
This has been reported on the forums here: https://forum.freecadweb.org/viewtopic.php?f=15&t=23763
This is 100% reproducible on a freshly installed and updated Ubuntu 18.04.1 and FreeCad daily from the PPA repository. |
|---|
| Steps To Reproduce | - Open the attached Latch.fcstd file
- In Fab / UpperBodyJob / Operations001, switch between Spiral and Zig-zag patterns.
- Observe that with Spiral pattern, there is a rather large island in the middle of the face, while with Zig-zag pattern the face is milled completely. |
|---|
| Additional Information | OS: Ubuntu 18.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15162 (Git)
Build type: Release
Branch: master
Hash: 1d72ee43435fa099ae97a2f6e3d15a225d4f32d3
Python version: 2.7.15rc1
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
|
|---|
| Tags | Path |
|---|
|
|
| FreeCAD Information | |
|---|
|
|
FreeCAD