View Issue Details

IDProjectCategoryView StatusLast Update
0003782FEMBugpublic2021-02-06 06:23
Reporteruwestoehr Assigned Touwestoehr  
PrioritynormalSeveritytweakReproducibilityalways
Status assignedResolutionopen 
Product Version0.18 
Target Version0.20 
Summary0003782: impossible to remove several references from FEM references lists
Description- create a FEM shell plate thickness and add several reference surfaces
- now you have e.g. 10 references in the list and need to remove 8 of them. Thus you try to select them

result: You cannot select more than one reference in the list, neither by pressing the Ctrl or Shift key or by mouse dragging etc. So you have to right-click on every reference to delete it -> this is very annoying and time consuming

Attached is a screenshot as example. I need to delete there Face 11 to Face 17.

This issue appears for all FEM reference lists (e.g. also for the FEM material).
TagsFEM
FreeCAD Information

Activities

uwestoehr

2019-01-20 03:40

manager  

FEM-Shell-reference-list.jpg (305,893 bytes)   
FEM-Shell-reference-list.jpg (305,893 bytes)   

uwestoehr

2019-01-20 03:43

manager   ~0012470

It would at least be helpful if pressing DEL would remove the references.

Kunda1

2019-01-22 23:36

administrator   ~0012491

@uwestoehr please follow the guidelines (enormous yellow banner at the top of the page) when opening tickets. There is no extensive FC version info, no forum thread. Please open a thread to discuss this with bernd, the FEM maintainer

uwestoehr

2019-01-23 23:31

manager   ~0012500

> There is no extensive FC version info

@Kunda1, I specified that I use version 0.18, see this bug report header. I also use the latest development snapshot as given in the yellow banner when reporting bugs.

> no forum thread. Please open a thread to discuss this with bernd, the FEM maintainer.

Sorry, but I don't have that much time. I reported a bug I saw and checked that it is not yet reported as best as possible. feel free to ignore my bug reports or close them immediately if you don't think it is a real bug.

I am an Open Source software developer too and know that some bug reports are not valid, thus I checked carefully not to report already existing issues. But you cannot expect people to discuss at first in a forum - waiting for replies, respond, waiting again... So I collected all bugs I found and reported them that they are not forgotten. (I don't use FC regularly, maybe once a month.)

Kunda1

2019-01-25 17:22

administrator   ~0012512

My response 0003781:0012509

Deferring to @berndhahnebach

berndhahnebach

2019-01-26 21:18

developer   ~0012525

Hi uwe and welcome to FreeCAD FEM. I must admit you are right. All the reference shape gui work flow needs some love. It is on my TODO for a long time. But not in very front position ...

cheers bernd

berndhahnebach

2019-01-26 21:28

developer   ~0012528

Last edited: 2019-01-26 21:28

related 0003783

uwestoehr

2019-01-27 04:02

manager   ~0012530

Hi Bernd, thanks for having a look. I also found other FC issues and tried to go the way to open a forum discussion first. But whenever I want to post something, I only get a message
"You cannot make another post so soon after your last."
What Am I doing wrong? Why can't I post anything to the forum despite I successfully created and activated an account?

uwestoehr

2019-01-27 04:03

manager   ~0012531

Hi Bernd, thanks for having a look. I also found other FC issues and tried to go the way to open a forum discussion first. But whenever I want to post something, I only get a message
"You cannot make another post so soon after your last."
What Am I doing wrong? Why can't I post anything to the forum despite I successfully created and activated an account?

wmayer

2019-01-27 13:39

administrator   ~0012532

> What Am I doing wrong? Why can't I post anything to the forum despite I successfully created and activated an account?

After posting the very first time on the forum a moderator must approve your initial post. This is because there are a lot of spammers these days and this way a spammer cannot flood the forum with crap.

uwestoehr

2019-01-27 15:02

manager   ~0012535

> After posting the very first time on the forum a moderator must approve your initial post.
OK, but please inform new people about this. I did not get any information despite the senseless message that I cannot post soon again despite not a single post was yet made.
I propose a message like this after pressing the first time Submit:
"Thanks for your first post. To avoid spam the first post of new users will be reviewed by our maintainers. Until it was approved you cannot made further posts."
Should I report this issue as a separate bug or post this in the forum?

uwestoehr

2020-10-24 21:57

manager   ~0014943

Meanwhile the situation improved. On can now use DEL to delete references. However, selecting several references and deleting them at once does not yet work. I will have a look.

yorik

2022-03-03 13:55

administrator   ~0016700

This ticket has been migrated to GitHub as issue 5865.

Issue History

Date Modified Username Field Change
2019-01-20 03:40 uwestoehr New Issue
2019-01-20 03:40 uwestoehr File Added: FEM-Shell-reference-list.jpg
2019-01-20 03:43 uwestoehr Note Added: 0012470
2019-01-22 23:36 Kunda1 Status new => feedback
2019-01-22 23:36 Kunda1 Note Added: 0012491
2019-01-23 23:31 uwestoehr Note Added: 0012500
2019-01-23 23:31 uwestoehr Status feedback => new
2019-01-25 17:22 Kunda1 Assigned To => berndhahnebach
2019-01-25 17:22 Kunda1 Status new => assigned
2019-01-25 17:22 Kunda1 Note Added: 0012512
2019-01-26 21:18 berndhahnebach Note Added: 0012525
2019-01-26 21:28 berndhahnebach Note Added: 0012528
2019-01-26 21:28 berndhahnebach Note Edited: 0012528
2019-01-27 04:02 uwestoehr Note Added: 0012530
2019-01-27 04:03 uwestoehr Note Added: 0012531
2019-01-27 13:39 wmayer Note Added: 0012532
2019-01-27 15:02 uwestoehr Note Added: 0012535
2019-01-27 15:03 uwestoehr Tag Attached: FEM
2020-10-24 21:57 uwestoehr Note Added: 0014943
2020-10-24 21:58 uwestoehr Assigned To berndhahnebach => uwestoehr
2021-02-06 06:23 abdullah Target Version => 0.20