View Issue Details
ID | Project | Category | View Status | Date Submitted | Last Update |
---|---|---|---|---|---|
0000675 | PartDesign | Feature | public | 2012-04-19 02:46 | 2017-01-09 15:51 |
Reporter | mbarronj | Assigned To | |||
Priority | normal | Severity | feature | Reproducibility | have not tried |
Status | closed | Resolution | fixed | ||
Fixed in Version | 0.13 | ||||
Summary | 0000675: Add Draft Angle to a surface | ||||
Description | A very common task in mechanical design is to add draft to a set of surfaces - this is equivalent to adding a 0.5-5 degree "chamfer" along the entirety of the face, usually so that the part can be pulled from an injection mold. | ||||
Additional Information | I don't know if this has been requested, but I do not see a specific request for it. I am still trying to get familiar with the development community and process in order to help out more for this project | ||||
Tags | No tags attached. | ||||
FreeCAD Information | |||||
|
There is an opencascade feature for this I believe. So I guess it would be possible, however it requires an additional reference plane to work. |
|
V0.13 now has PartDesign::Draft feature. So this could be set to resolved IMHO |
Date Modified | Username | Field | Change |
---|---|---|---|
2012-04-19 02:46 | mbarronj | New Issue | |
2012-05-05 18:00 | yorik | Project | FreeCAD => PartDesign |
2012-05-06 12:00 |
|
Status | new => assigned |
2012-05-06 12:00 |
|
Assigned To | => Jriegel |
2012-06-12 21:56 | mrlukeparry | Note Added: 0002191 | |
2013-01-13 14:30 | jrheinlaender | Note Added: 0002844 | |
2017-01-09 15:51 | wmayer | Status | assigned => closed |
2017-01-09 15:51 | wmayer | Resolution | open => fixed |
2017-01-09 15:51 | wmayer | Fixed in Version | => 0.13 |