View Issue Details
ID | Project | Category | View Status | Date Submitted | Last Update |
---|---|---|---|---|---|
0001560 | Sketcher | Feature | public | 2014-05-20 20:41 | 2021-02-06 05:55 |
Reporter | CABrouwers | Assigned To | abdullah | ||
Priority | normal | Severity | minor | Reproducibility | N/A |
Status | assigned | Resolution | open | ||
Product Version | 0.13 | ||||
Target Version | 0.20 | ||||
Summary | 0001560: Provide ability to fine-tune auto constraints. | ||||
Description | It could be nice to be able to select which constraints are automatically added when using auto constraints. For example, I usually would set the coincidence constraint on but I would rather turn the tangent constraint off because I find it is often creates unwanted constraints. | ||||
Tags | constraints, Solver | ||||
FreeCAD Information | |||||
Date Modified | Username | Field | Change |
---|---|---|---|
2014-05-20 20:41 | CABrouwers | New Issue | |
2017-05-22 13:31 | Kunda1 | Tag Attached: Solver | |
2017-05-22 13:32 | Kunda1 | Note Added: 0009079 | |
2017-05-22 21:47 | abdullah | Note Added: 0009093 | |
2017-05-22 21:47 | abdullah | Assigned To | => abdullah |
2017-05-22 21:47 | abdullah | Status | new => assigned |
2017-09-26 15:22 | Kunda1 | Tag Attached: constraints | |
2017-10-18 12:23 | wmayer | Project | FreeCAD => Sketcher |
2017-12-13 15:20 | Kunda1 | Project | Sketcher => GCS |
2018-06-09 09:10 | abdullah | Project | GCS => Sketcher |
2018-10-06 14:54 | abdullah | Target Version | => 0.19 |
2020-11-09 18:09 | abdullah | Target Version | 0.19 => 0.20 |
2021-02-06 05:55 | abdullah | Target Version | => 0.20 |