0001742: Add Reverse Fillet Tool or Option in Part / Part Design

ID	Project	Category	View Status	Date Submitted	Last Update

0001742	PartDesign	Feature	public	2014-09-11 22:44	2021-02-06 06:43

Reporter	quick61	Assigned To
Priority	normal	Severity	minor	Reproducibility	have not tried
Status	new	Resolution	open
Target Version	0.20

Summary	0001742: Add Reverse Fillet Tool or Option in Part / Part Design
Description	The discussion has come up several times on the forum about the lack of a reverse fillet tool. The most recent one starting here - http://forum.freecadweb.org/viewtopic.php?f=3&t=7633&p=62333#p62329 Attached is an image of what the end result of the reverse fillet would be. If OCE will allow the implantation of such a tool, it would be a nice feature to have in the next release.
Tags	GUI, Part, Part Design

FreeCAD Information

quick61 2014-09-11 22:44 reporter	Reverse_Fillet.png (12,608 bytes) Reverse_Fillet.png (12,608 bytes)

quick61 2014-09-13 03:39 reporter ~0005095	An older Forum discussion on this subject is here - http://forum.freecadweb.org/viewtopic.php?f=3&t=6667&hilit=ogee#p53838 And from this post - http://forum.freecadweb.org/viewtopic.php?f=3&t=6667&hilit=ogee&start=10#p53899 - it would seem that a proper name for the tool would be Cove.

PedjaS 2020-11-02 20:17 reporter ~0014958	This seems to be forgotten?

yorik 2022-03-03 13:55 administrator ~0016430	This ticket has been migrated to GitHub as issue 5595.

Date Modified	Username	Field	Change
2014-09-11 22:44	quick61	New Issue
2014-09-11 22:44	quick61	File Added: Reverse_Fillet.png
2014-09-13 03:39	quick61	Note Added: 0005095
2014-09-13 03:40	quick61	Tag Attached: GUI
2014-09-13 03:40	quick61	Tag Attached: Part
2014-09-13 03:40	quick61	Tag Attached: Part Design
2017-01-16 18:41	Kunda1	Project	FreeCAD => PartDesign
2020-11-02 20:17	PedjaS	Note Added: 0014958
2021-02-06 06:43	abdullah	Target Version	=> 0.20