FreeCADView Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0003268 | FreeCAD | Feature | public | 2017-11-21 09:31 | 2021-02-06 06:50 |
| Reporter | herrdeh | Assigned To | |||
| Priority | normal | Severity | major | Reproducibility | always |
| Status | new | Resolution | open | ||
| Product Version | 0.17 | ||||
| Target Version | 0.20 | ||||
| Summary | 0003268: [feature] surface cleaner or smooth surface tool (e.g. Mesh WB's "close holes") | ||||
| Description | I'm doing mainly plastic parts, which have a shell and some internals, internals are mainly made with boxes for enforcement purpose. As plastic parts should have nice smooth rounded shapes - and boxes tend to be rectangular, the internals always will jut out of the outer surface. There are various methods to "sand down" these edges and outstands, we discussed this issue here: German forum thread - but it always is quite some work, and it can cause quite some trouble. The Mesh WB has got a nice feature "close holes" - maybe some thoughts from the code could be used for that purpose. I'd be happy to have a "surface cleaner" or "smooth surface" tool to get out of these complications Cheers, Wolf | ||||
| Tags | No tags attached. | ||||
| FreeCAD Information | |||||
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2017-11-21 09:31 | herrdeh | New Issue | |
| 2017-11-21 11:01 | Kunda1 | Description Updated | |
| 2017-11-21 11:03 | Kunda1 | Summary | [feature req:] surface cleaner => [feature] surface cleaner or smooth surface tool (e.g. Mesh WB's "close holes") |
| 2021-02-06 06:50 | abdullah | Target Version | => 0.20 |
